Top 10 common forklift mishaps ， forklift operation should pay attention to these matters ！.
Top 10 common forklift mishaps ， forklift operation should pay attention to these matters ！.
Blog Article
Do not undervalue the forklift at work. If the procedure is not good, there will be major mishaps in mins, and there are numerous mishaps entailing forklifts.
Situation 1: The forklift cargo obstructed the chauffeur's view, and the individual ahead can not be found, causing a rolling mishap.
Instance 2: In order to keep the equilibrium of the forklift when lifting heavy goods, the employees used their body weight as the counterweight, which nearly created casualties.
Instance 3: The size of the forklift freight goes beyond the allowable size of the course and holds on the roadside shelf, which almost triggers an accident.
Instance 4: Forklift is speeding up and rolls over throughout a turn.
Situation 5: The forklift chauffeur did not see the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift lifts the workers unlawfully, the forklift vehicle driver does not put on the seat belt, the forklift lifter drops and the driver is crushed when the forklift rolls over.
Instance 7: The forklift motorist did not put on a seat belt and fell from the car when it surrendered and was crushed.
Forklift operation ought to focus on these issues ：.
Start.
1. Before beginning, observe the environments, and after verifying that there are no barriers that impede the safety of driving, honk the horn initially and afterwards begin.
2. For automobiles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress (air pressure) scale should be safe before beginning.
3. When the forklift starts with a load, the chauffeur should first verify that the load is secure and trusted.
4. The start has to be slow-moving and stable.
Driving.
1. When driving, the elevation between the bottom end of the fork and the ground need to be maintained 300mm-400mm, and the mast ought to be slanted backwards. .
2. Do not lift the fork too high when driving. When going into and leaving the work site or while driving, take care that there will be no obstacles in the sky. When the lots is taking a trip, the fork has to not be raised too high, which will certainly influence the stability of the forklift. .
3. After discharging, the fork needs to be reduced to the typical driving position prior to driving. .
4. When turning, if there are pedestrians or cars close by, the driving signal should be provided initially. High-speed doglegs are restricted. High-speed sharp turns will create the vehicle to shed lateral security and topple. .
5. When the forklift is downhill, it is strictly forbidden to switch off the flame and slide, and it is prohibited to brake unexpectedly while driving with lots unless there are unique circumstances.
6. When the forklift is running, it should comply with the website traffic rules in the factory and must keep a specific safety range from the lorry ahead. .
7. When the forklift is running, the load has to remain in the most affordable position that does not prevent the driving, and the gantry needs to be effectively tilted back. The load will not be elevated other than when piling or filling. .
8. The height of the tons must not block the motorist's sight. In special conditions, when the thing impacts the forward vision, drive at a low rate when reversing.
9. It is restricted to switch on the ramp, nor to drive across the ramp. .
10. The secure driving speed of the forklift in the factory area is 5 km/h, and it must drive securely at a low rate when entering the manufacturing workshop area. .
11. When the forklift is lifted, raised or driven, it is restricted for workers to base on the fork to hold items and play a balancing function. .
12. If problems are found, they will be repaired and reported in a prompt fashion, and they will certainly never run with health problems or hide them.
filling and discharging.
1. When fork-loading products, the range in between the two forks should be changed as required to make the tons of the two forks well balanced and not skewed, and one side of the item need to protest the shelf. .
2. It is restricted to deal with a single fork or make use of a fork top or pull. In unique circumstances, safety indication should be established to remind surrounding pedestrians. .
3. In the process of loading and unloading things, the forklift should be stopped with the brake. .
4. The speed of the lorry need to be sluggish and constant. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled items and hurt people. .
5. When utilizing a fork to fork the goods, the fork must be as deep as possible under the lots, and it ought to be noted that the fork idea ought to not touch other goods or items. The tons ought to be maintained with very little back tilt of the gantry so that the tons does not move in reverse. The mast can be slanted forward somewhat when the lots is decreased to allow for simple positioning of the lots and extraction of the forks. .
6. It is prohibited to fork items at high speed and collide with hard items with the fork head. .
7. When the forklift is functioning, it is restricted for people to loaf the fork, so as to prevent the collapse of the goods and harm individuals. .
8. Overwhelming is prohibited, and it is forbidden to make use of forks to raise personnel to engage in high-altitude operations to stay clear of high-altitude falling accidents. .
9. Stand-on Electric Pallet Stacker It is not enabled to use the brake inertia to slide, put, round or roll things. .
10. It is not enabled to make use of forks to choose, transform pallet dump.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork impend. Before leaving the forklift, you Electric Forklift Truck for Warehouse need to discharge the goods or reduced the fork frame.
2. Pull the hand brake handle to dead or dispirit the hand brake switch.
3. The engine is shut off and the power is removed. (Except for unique circumstances, such as the driver does not leave the lorry's line of vision and does not go beyond 1 minute).
4. Get rid of the trick. .
Forklift Operation Precautions.
1. Before and after the forklift operation, the look must be examined, and fuel, lubing oil and air conditioning water should be added.
2. Check the safety efficiency of starting, running and stopping.
3. Inspect whether the lights and horn signals are total and efficient.
4. Throughout the operation of the forklift, check whether the stress and temperature are regular.
5. After the forklift is running, the outside leak must also be examined and the seals need to be changed in time.
Forklift Safety Operation Specifications.
1. You must examine before leaving the cars and truck;.
2. When you come across somebody in front of you throughout driving, you should send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the low point of the freight need to be 0.3 m ~ 0.4 m in the air;.
5. The transforming need to not be too sharp to avoid the propensity of "free turning";.
6. Running up and down the slope must be slow and uniform, and no switching on the slope is allowed.
7. Do not drive across the gradient. When the gradient is above 10%, the lorry must be driven in reverse when declining;.
8. When the forklift personnel carry the goods and move on, if they experience large or hefty goods and go to the vehicle driver's line of vision, they need to take the turning around workout
.
The "Eight Prohibitions" must be adhered to in the operation.
1. Single fork procedure is not enabled.
2. It is not enabled to lift the goods for cross country driving.
3. It is not permitted to grab the goods by turning over the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not allowed to make use of inertia force to pick up the goods.
6. It is not permitted to make use of stopping force to exile round or easy-to-roll objects.
7. It is not permitted to bring individuals to work with the pallet or fork, and it is purely prohibited to stand under the fork after the fork is raised.
8. Do not drive side to side on inclines
.
Parking is not allowed under the list below conditions.
1. Curves, slim roadways, railway crossings;.
2. Areas with a longitudinal slope above 5%.
3. When there is an obstacle on one side of the roadway, the contrary side of the area with the exact same length as the barrier should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844